67 GTA home
I wish that my headers were not universal so they would not have the provision for a clutch, it would be much more symmetrical. These are Headman Elites for the 351W swap, plenty of room for the AOD but the exhaust man is going to have fun hooking them up to the exhaust since this is a convertible space is quite limited.
A good view of the Rack bolted in place of the crossmember.
I had to take off my wire looms and distributor to get easy access to the header bolts. But they look pretty good in there.
You can barely see the bellows for the rack as well as the primary tubes for the headers.